|
|
|
Entering a Ringtone into your Sagem Cell Phone is easy
We have tried to make entry of the ring tones into your Sagem mobile phone as simple as possible. These instructions are based on ringtone entry for the MW 3020, however most Sagem models are the same so they should apply if you are using a different Sagem handset.
To enter the tones into your handset.
1. First, locate your ring tone composer
Scroll down through the menu to 'Ringing and Beeps' and press 'Ok'. Scroll to 'Personalised Ringtone' and press 'Ok' again. Select 'Create a Tune'.
Your phone will now display a musical score ready to take the ringtone....
2. Enter the key press sequence
Once you have located the composer on your phone, you need to enter the key press sequence given to you by the ring tone converter software.
Now (in the phones melody composer), simply type these numbers into your keypad.
Where you see ^ or v enclosed in brackets together with a number, press the middle scroll button up or down the number of times specified, for example (v4) means press the middle scroll button down four times. Where you see (ok) press the 'Ok' button.
For all other numbers and '#' shown outside brackets simply press the appropriate key.
3. Save the tone
When you have finished press the top left key to enter the 'Options' menu and set the tempo, then quit from this menu and press the top middle button to play your new ringtone.
If the tone doesn't sound right, you have probably missed a key so you may wish to try entering the key sequence again.
Job Done!
|
